Marine compound and marine polish in one

Meguiar’s Marine/RV M67 One Step Compound is an aggressive, yet safe cutting compound with polish that cleans and restores gloss to gel coat surfaces in one step. With the use of this formula you can reduce the steps needed treating neglected surfaces by compounding and polishing at the same time. This advanced compound works quickly to remove heavy oxidation, scratches, stains, and tough water spots on all fiberglass and painted gel coat marine or RV surfaces. Obtain excellent results by hand or by machine restoring neglected surfaces to bring back that rich, high gloss shine that you had when the boat or RV was band new.

Tips and suggestions for using Meguiar’s marine compound

• Before using a marine compound to remove below surface defects, wash and dry the surface of your boat or RV with a premium wash. Meguiar’s M54 Gel Wash is a great product to effectively remove loose surface contaminants without stripping wax protection. With biodegradable* detergents, it’s safe for both your boat and the marine life!
• Shake the product thoroughly before use.
• Always make sure the surface you are working with is cool to the touch.
• Do not apply to vinyl surfaces, rubber surfaces or on decals.
• If you have defects that the M67 One Step Compound can’t remove step up to Meguiar’s Marine/RV M91 Power Cut Compound for more severe defect removal without scouring the finish.
• After removing all defects and bringing back maximum shine, be sure to put protection back on the surface with Meguiar’s Marine/RV M56 Pure Wax Carnauba Blend or Meguiar’s M63 Flagship Premium Marine Wax.

Working by Machine

• Working a section at a time using a small amount of product. With a new pad, prime the it with an even distribution of product over the pad. Reapply a small amount of product as needed.
• Use moderate pressure, spread the product evenly with overlapping movements to ensure uniform coverage.
• Work the product in until nearly dry. Immediately wipe with a Meguiar’s Supreme Shine Microfiber Towel or a 100% cotton, terry cloth.
• For best results, use with a high-speed rotary buffer and a Meguiar’s Soft Buff Rotary Wool Pad or Meguiar’s Soft Buff Rotary Foam Cutting Pad.

Working by Hand

• Working a section at a time using a small amount of product on a 100% cotton terry cloth towel or Meguiar’s Soft Foam Applicator Pad.
• Rub thoroughly into the surface with moderate pressure.
• Immediately wipe with a Meguiar’s Supreme Shine Microfiber Towel or a separate cotton terry towel.
• Do not let product dry on the surface.

*Detergents biodegradable per Regulation (EC) No 648/2004.