Marine compound removes moderate oxidation and restores gloss

Meguiar’s Marine/RV M49 Heavy Duty Oxidation Remover is an advanced formula that works to remove light to moderate defects in fiberglass and gel coat surfaces while enhancing depth of shine. Gel coat and fiberglass starts to oxidize and loose it’s depth of shine with time, exposure to the elements, and exposure to the sun’s damaging UV rays. It can make your boat or RV look dull and older than it really is. Heavy Duty Oxidation Remover restores the original color and shine of older fiber glass gel coat surfaces by effectively remove surface degradation. It also excels at removing defects like oxidation, water spots, stains and scratches. Unique diminishing abrasives break down and safely disappear during application leaving the surface with restored depth of shine. Specialized enriched feeder oils work to nourish and restore color while adding enhanced gloss. Whether working by hand or by machine, M49 will work to remove oxidation while restoring depth, gloss and color.

Tips and suggestions for using Meguiar’s Oxidation Remover

• Before using a marine compound to remove below surface defects, wash and dry the surface of your boat or RV with a premium wash. Meguiar’s M54 Gel Wash is a great product to effectively remove loose surface contaminants without stripping wax protection. With biodegradable* detergents, it’s safe for both your boat and the marine life!
• Shake the product thoroughly before use.
• Always make sure the surface you are working with is cool to the touch.
• Do not apply to vinyl surfaces, rubber surfaces or on decals.
• If you have defects that the M49 Heavy Duty Oxidation Remover can’t remove, step up to Meguiar’s Marine/RV M67 One Step Compound for heavy defects or Meguiar’s Marine/RV M91 Power Cut Compound for severe defect removal without scouring the finish.
• After removing all defects and bringing back maximum shine, be sure to put protection back on the surface with Meguiar’s Marine/RV M56 Pure Wax Carnauba Blend or Meguiar’s M63 Flagship Premium Marine Wax.

Working by Machine

• Working a section at a time using a small amount of product. With a new pad, you want to prime it by applying an even distribution of product over the pad. Reapply a small amount of product as needed.
• Use moderate pressure, spread the product evenly with overlapping movements to ensure uniform coverage.
• Work the product in until nearly dry. Immediately wipe with a Meguiar’s Supreme Shine Microfiber Towel or a 100% cotton, terry cloth.
• For best results, use with a high-speed rotary buffer and a Meguiar’s Soft Buff Rotary Foam Cutting Pad.

Working by Hand

• Working a section at a time using a small amount of product on a 100% cotton terry cloth towel or Meguiar’s Soft Foam Applicator Pad.
• Rub thoroughly into the surface with moderate pressure.
• Immediately wipe with a Meguiar’s Supreme Shine Microfiber Towel or a separate cotton terry towel.
• Do not let product dry on the surface.

*Detergents biodegradable per Regulation (EC) No 648/2004.